Operation is automatic but you may override the system using the Pool App which has intuitive controls. You can,

Stop the entire system

 

Run any configured device in manual, such as:-

Filter pump (chlorinator is off)

Chlorinator (also switches filter on)

Gas Heater (also switches filter on)

Heat Pump (also switches filter on)

Solar Heater (switches filter on only if required)

Pool Sweep or Robot (switches filter on only if required)


or you can also use the lighted control buttons if control buttons have been supplied on the Intelligent Pool Controller panel.


You can use the control buttons if these have been supplied on the Intelligent Pool Controller panel poolside.
  These proved override control to:
  1. Stop the entire system
  2. Run the Pool Filter pump in manual
  3. Run the Pool Sweep in manual (if fitted)